Nederlands Nederlands
Deutsch Deutsch
Русский Русский
Français Français
Español Español
 
MPS
     

    MPS

    « back

    Humarbo’s MPS handling machine is a modern, automatic system used for constructing reinforced and non-reinforced products and is also suitable for wet cast production.

    The MPS handling machine runs on a crane track. The demoulding of the products occurs at an ergonomic height.

    The MPS handling machine consists of a moveable frame running on a crane track. This moveable frame is fitted with a locking and tilting unit that can rotate the pallet and the mould 180 degrees. The vibrating table including the mould is set up entirely separate from the machine frame and is easily accessible from all sides.


    MPS 3.25LMPS 4.25L
    MPS 4.25HMPS 5.25HMPS 6.25HMPS 7.25H
    Maximum product length [m]3,254,255,256,257,25
    Standard product width [m] *1,251,251,251,251,25
    Standard product height [cm]5 - 405 - 405 - 405 - 405 - 40
    Maximum product weight [kg]15001500/2500250030003500
    Maximum lift capacity [kg]60006000/900090001250012500
    * Multiple widths possible